RTD Studies in Plug Flow Reactor

Model HV-EXP1759
RTD Studies in Plug Flow Reactor  Real reactors do not satisfy the idealized flow patterns, back mix  flow or plug flow deviation from ideality can be due to channeling of  fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel..          To  predict the exact behavior of a vessel as a Chemicals reactor, RTD or  stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be  adjusted by operating the needle valve and measured by Rotameter. The  magnetic drive pump is used for circulation of feed. It is a helical  coil tube type plug flow reactor made up of Stainless steel pipe.  Reactants enter at lower end coming out of the top of coil from where  samples are collected for analysis. For understanding the RTD  characteristics, a special arrangement to inject tracer into the lower  end of reactor, using a syringe is provided Experiments To plot RTD curve for Plug Flow Reactor To determine the Dispersion No Utilities Required Water Supply & Drain Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted     Chemical Reaction Engineering lab equipment manufacturers,exporters and Chemical Reaction Engineering Lab suppliers