Physiotherapist Lab Trainer

Manufacturers & Bulk Exporters of Scientific & Laboratory Equipment Suppliers for Schools, Colleges, Research Laboratories. Physics Lab, Chemistry Lab Supplies Lab.
Hydrocollator ,Hot Pack
Hydrocollator ,Hot Pack Model HV-EXP4381
Application : Hydrocollator is the modality of thermotherapy. It is thermostatically controlled machine to warm the water at a specific temperature of 100oF to 110oF. The inner chamber of unit is made of stainless steel and outer is heavy duty mild steel duly oven back painted and mounted on a M.S. frame fitted with heavy duty casters. Salient Features : Thermostaticlly controlled unit. Concealed air heaters which does not come in the direct contact of water and chamber. Temperature maintain indicator and mains indicator. S.S. chamber to avoid oxidation due to continuous use of water. Silica gel packs of different shape and size. .

View Details
Continuous Passive Motion Machine
Continuous Passive Motion Machine Model HV-EXP4380
Description : CPM is a method to treat joints of the lower limb for post operation recovery and gives excellent results. The device is programmed for septic arthritis, ligaments tendon healing and also for treatment of intra articular fractures. Salient Features : Electronic controls enables for range of motion. Adjustable flexion angle from 0o to 110o. 0 to 30 minutes countdown timer. Patient safety switch to stop and reverse the motion. Manual up/down:Manual flexion and release Technical Specification: Mains Input : 20V AC 50Hz Power : 20 watt Time : 0 to 30 minutes Flexion Angle : Adjustable from 0o to 110o Delay timer : 0 to 10 second Weight : 9 Kg.

View Details
Quadriceps Table
Quadriceps Table Model HV-EXP4378
Salient Features : A quadriceps exercise table with cushion top, two model, with back rest and without back rest. Duly power coated frame work, force adjustment, locking torque and key assembly. Angle of movement can be adjusted in variable position along with cushion leg and weight carrier..

View Details
Shoulder Wheel (Axial Model)
Shoulder Wheel (Axial Model) Model HV-EXP4379
Salient Features : For shoulder and arm exercise used in the same way as a conventional shoulder wheel. A wall mounting unit is suitable for small clinics, adjustable in height and radius. The resistance can be increased by tightening the strap. Adjustment bar are chrome plated along with an attachment for wrist exercise..

View Details
Shoulder Wheel,Wall Mounting
Shoulder Wheel,Wall Mounting Model HV-EXP4377
Salient Features : Wall mounting heavy duty shoulder wheel constructed with calibrated resistance mechanism, resistance can be controlled from zero to maximum. The 360o scale enables degree of revolution to be read from either direction. Arc of motion can be varied. Fitted with a chromium plated adjustment bar to raise up and release down to wheel as per height requirement of different patient. Provision for adjustment of arm length is provided..

View Details
Muscle Stimulator ,Therauptic
Muscle Stimulator ,Therauptic Model HV-EXP4376
This compact Solid-state Microprocessor Controlled unit, with digital timer and intensity display is useful for functional paralysis resulting from traumatic neurosis, Hysterical of Neuropraxia, Flaccid Paralysis, Spastic Paralysis, Cardio-vascular disorders and Muscle Strain etc.This Therapeutic Muscle Stimulator has Galvanic, Interrupted Galvanic, Faradic and Surge Faradic currents. This unit is housed with ABS molded cabinet. Salient Features : Microprocessor controlled Pulse durations: 03, 1, 10, 30, 100, 300 ms Pulse Repetitive Freq.: 0.3, 1, 3 seconds Intensity variations: 0~130 Volts Technical details : Weight: 1.6 Kg. Height: 139.7 mm Width: 266.7 mm Depth: 190.5 mm Voltage: AC 100~260 Protection Class – I Complies with IEC 601-1 Option for Built-in rechargeable battery.

View Details
Interferential Therapy
Interferential Therapy Model HV-EXP4375
Salient Features : The interferential therapy offers advance technique to reduce pain and to exercise muscles with low frequency current. In I.F.T. two medium frequency currents are used crossing to each other at a point to produce a low frequency current Area of Application: Deep sited pain, sports injuries, pain of rheumatoid arthritis, pain of osteo arthritis, pain of osteo arthritis, miscular weakness etc Salient Features: The therapy modes:(a) 4 pole interferential, (b) 4 pole vector, (c) 2 pole modulated Digital timer with alarm which cuts off when display read zero. Dual intensity display i.e. CH-1 digital display and CH-2 LED display. Sweep program. Balance control of intensity. Technical Specification: Medium frequency : 2 Khz 4 Khz Base frequency : 0 - 150 Hz Sweep frequency : 0 - 100 Hz.

View Details
Diagnostic Muscle Stimulator
Diagnostic Muscle Stimulator Model HV-EXP4374
alient Features : This diagnostic unit is useful for treatment of muscle weakness, functional paralysis resulting from Traumatic Neurosis, Hysterical of Neuropraxia, Flaceed Paralysis, Spastic Paralysis, Cardio Vascular disorders, Muscle trains etc. This muscle stimulator with Glavanic, Interrupted Galvanic, Faradic and Surge faradic currents comes in a compact metal housing duly fitted in a briefcase along with standard accessories. This device can also be used to plot S.D. curve due to its multi step frequency and duration of pulse width. Accessories: Standard accessories consist of plastic coated handle with cable, ball electrode, one patient leads with plate electrodes Technical Specification: Input Voltage :220V AC 50Hz Maximum output 120 Volts, smooth intensity control i) Pulse Width: 10 micro/sec. to 300 milli sec. Pulse duration step control .01 to 300 milli sec., ii) Frequency: 6 Pulse per min. to 30 pulse per min. 1 pulse/milli sec. to 100 pulse milli sec. Faradic :Comprises 40 pulses per second, each pulse of 0.9 ms Surge Faradic :Two isolated controls are provided for changing contraction rest period Intensity :Common intensity control for all four mode of therapy Mode Selector :Logic selector for selection of each therapy mode. An analog meter is provided for display of intensity for all four modes.

View Details
Transcutaneous Electric Nerve Stimulator
Transcutaneous Electric Nerve Stimulator Model HV-EXP4373
Salient Features : This is a low frequency current modality most widely used as analgesic Physio therapeutic modality. Unit is available in single or multi channel. Indication: Acute pain of osteogenic, myogenic, neurogenic origin. Dhornic pain of osteogenic, myogenic, neurogenic origin. Technical Specification: Input Voltage: 220 Volts A.C. 50 Hz. Frequency : 10 - 100 Hz. wave Shape: Biphasic.

View Details
Traction Table Model HV-EXP4372
Salient Features : The three fold fixed upholstered traction table is idle for horizontal cervical and lumbar traction purpose. The lumbar section rolls freely on ball bearing roller for friction free lumbar pull. Cervical traction angle is controlled by vertical adjustment of machine mounting board. Complete with flexion stool. The modifies cushioned top traction table is totally folding, which can be dismantled for transportation Operates in static or intermittent mode. Digital display for hold time and rest time. Feather touch selection for treatment time with digital display. Feather touch selection for treatment time with digital display. Patient safety switch with audio visual alarm. Alarm at the end of treatment comes up and traction force released. Accessories: Cervical Collar, Cervical spreader bar, Pelvic belt, Thoracic belt, Traction doubler, Main cord Power Consumption : 100 Watt(approx.) Input Voltage: 220 Volts A.C. 50 Hz. Hold Time : 20, 40, 60, 80(second) Release Time : 1,5,10,20(second) .

View Details
Traction Machine
Traction Machine Model HV-EXP4371
Salient Features : This device is an innovative break through over other traction in the market for the treatment of cervical and lumbar region of the spine with salient features: Operates in static or intermittent mode. Digital display for hold time and rest time. Feather touch selection for treatment time with digital display. Feather touch selection for torque of 5 to 45 Kg. with digital display. Patient safety switch with audio visual alarm. Alarm at the end of treatment comes up and traction force released. Accessories: Cervical Collar, Cervical spreader bar, Pelvic belt, Thoracic belt, Traction doubler, Main cord Technical Specification: Power Consumption : 100 Watt(approx.) Input Voltage: 220 Volts A.C. 50 Hz. Hold Time : 20, 40, 60, 80(second) Release Time : 1,5,10,20(second) .

View Details
Short Wave Diathermy
Short Wave Diathermy Model HV-EXP4370
Specification: This is simple but versatile, compact size, light weight and extremely easy to use utility. This is the most user oriented solution metting in every respect the requirement of visiting physiotherapist for home visit Technical Specification: Power Output : 250 Watt of R.F. Operating Frequency : 27.12 Mhz(approx.) Wave Length: 11.06 Meter(approx.) Mains Supply : 220 Volts A.C. 50 Hz. R.F. Source : Vacuum generating valve Dimension : (380W x 285H x 280D) mm Weight : 14 Kg.

View Details
Short Wave Diathermy
Short Wave Diathermy Model HV-EXP4368
Salient Features :A newly improved traction table suitable Most commonly and globally used modality designed to run many hours constantly to compete the rush of patient. This heavy duty device has its versatility for continuous use. Technical Specification: Power Output : 500 Watt of R.F. Operating Frequency : 7.12 Mhz(approx.) Wave Length : 11.06 Meter(approx.) Mains Supply : 220 Volts A.C. 50 Hz. R.F. Source : Vacuum generating valve Dimension : (545W x 915H x 455D) mm Weight : 38 Kg.

View Details
Digital Ultrasonic Model HV-EXP4369
Salient Features :A newly improved traction table suitable Most commonly and globally used modality designed to run many hours constantly to compete the rush of patient. This heavy duty device has its versatility for continuous use Technical Specification: Power Output : 17 watt continuous, 22 watt pulsed, 29 watt pulsed Operating Frequency : 1 Mhz Input Voltage : 220/240 Volts A.C. 50Hz.

View Details
Traction Treatment Table
Traction Treatment Table Model HV-EXP4367
Salient Features : A newly improved traction table suitable for Lumber or Cervical Traction. This table can also be used for other treatment instruments. The table is bery sturdy with a 24" wide top. The table is fitted with 'non friction' rolling lumber section top for smooth efficient traction. A mounting board is provided for convenient placement of traction machine. The table top elegant by thick upholstered id 72" (183cm) long. The overall length of the table is 92" approx. The mounting board is fitted with levelling device and provided with non skidpad..

View Details