Cutaway Models

Cutaway models are demonstration models of different types of mechanisms installed in either engine rigs, turbines or electric motors. These models show the internal structure and positioning of components in electrically operated machines. All the cutaway models are precise and accurate in their built and suitable for all related laboratory applications.
ZF 3HP Automatic Transmission
ZF 3HP Automatic Transmission Model HV-EXP1302
Main Technical Specifications: 3 Forward speeds and reverse Casing Torque converter Oil pump Stationary plate clutch Rotary plate clutch Planetary gear train Hydraulic circuit valve Centrifugal regulator The planetary gear and clutch rotation are controlled by a crank located on the torque converter. Other Specifications: Operated: Manually (Through a Crank Handle) Equipment Layout: On Stand with Wheels

View Details
Automatic Transmission (5 Forward Gears and Reverse) Model HV-EXP1303
Main Technical Specifications: Hydraulic converter Epicyciclic gear with 5 forward speeds and reverse Multiple-plate clutches Control valves Other Specifications: Operated: Manually (Through a Crank Handle) Equipment Layout: On Stand with Wheels.

View Details
Automatic Transmission
Automatic Transmission Model HV-EXP1304
Main Technical Specifications: Hydraulic converter Epicyciclic gear with 3 forward speeds and reverse Multiple-plate clutches Control valves Other Specifications: Operated: Manually (Through a Crank Handle) Equipment Layout: On Stand with Wheels.

View Details
Gearbox with Clutch (5 Forward Gears and Reverse) Model HV-EXP1305
Main Technical Specifications: Dry single-plate clutch with spring and diaphragm The clutch is operated mechanically by meansof a foot pedal for training purposes Operated: Manually (Through a Hand Wheel) Equipment Layout: On Stand with Wheels.

View Details
Gearbox with Clutch (4 Forward Gears and Reverse) Model HV-EXP1306
Main Technical Specifications: Dry single-plate clutch with spring and diaphragm The clutch is operated mechanically by meansof a foot pedal for training purposes Operated: Manually (Through a Hand Wheel) Equipment Layout: On Stand with Wheels.

View Details
Gearbox with Differential (5 Forward Gears and Reverse)
Gearbox with Differential (5 Forward Gears and Reverse) Model HV-EXP1307
Operated: Manually (Through a Crank Handle) Equipment Layout: On Stand with Wheels.

View Details
Gearbox (5 Forward Gears and Reverse) Model HV-EXP1308
Equipment Layout: Gearbox on Panel Operated: Manually Equipment Layout: Gearbox on Stand with Wheels Operated: Manually (Through a Hand Wheel).

View Details
Gearbox with Differential (5 Forward Gears, Reverse and Hydraulic Control Clutch)
Gearbox with Differential (5 Forward Gears, Reverse and Hydraulic Control Clutch) Model HV-EXP1309
Operated: Manually (Through a Hand Wheel) Equipment Layout: On a Stand-table Support.

View Details
Gearbox with Differential (6 Forward Gears and Reverse)
Gearbox with Differential (6 Forward Gears and Reverse) Model HV-EXP1310
Operated: Manually (Through a Hand Wheel) Equipment Layout: On Stand with Wheels.

View Details
Steering Box with Hourglass Screw
Steering Box with Hourglass Screw Model HV-EXP1311
Operated: Manually Equipment Layout: On Base.

View Details
Opposed piston Engine- Engineering Lab Training Systems Model HV-EXP1352
Main Technical Specifications: Lycoming/Piaggio/Continental 6-opposed cylindersengine Air cooling Gear distribution with camshaft in the crankcase Ignition with magneto Single-body carburettor Other Specifications: Operated: Electrically (Motor 230 V) Equipment Layout: On Stand with Wheels.

View Details
Radial Engine- Engineering Lab Training Systems
Radial Engine- Engineering Lab Training Systems Model HV-EXP1353
Main Technical Specifications: Driving shaft with integral master rod andmoving connection rods Air cooling Double ignition (2 spark plugs per cylinder and 2magnetos) Other Specifications: Operated: Electrically (Motor 230 V) Equipment Layout: On Stand with Wheels.

View Details
Turbo Jet Engine Model- Engineering Lab Training Systems Model HV-EXP1354
Other Specifications: Operated: Electrically (Motor 230 V) Equipment Layout: On Base.

View Details
Turbo Jet Engine Model with High pressure Compressor- Engineering Lab Training Systems Model HV-EXP1355
Other Specifications: Operated: Electrically (Motor 230 V) Equipment Layout: On Base.

View Details
Turbo starter Small Turbine Engine- Engineering Lab Training Systems Model HV-EXP1356
This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.. Many parts have been chromium, plated and galvanized for a longer life. Other Specifications: Operated: Manually, through a crank handle Equipment Layout: On Base.

View Details